Oxidation into CO2 is a major solution to CO abatement in air depollution treatments. The
development of catalytic converters led to an extraordinary high number of publications on …

The content of trace boron and phosphorus impurities in trichlorosilane and hydrogen is the
main factor affecting the quality of polysilicon. Improving the removal efficiency of boron and …

Heterogeneous electrocatalytic wet H2O2 oxidation technique for the removal of azo dye
amaranth from aqueous solution was studied in the presence of solid CuO/γ-Al2O3 catalyst …

Nanosized mesoporous CuMgAl ternary oxide catalysts were prepared by thermal
decomposition of CuMgAl-layered double hydroxides at 500° C with nominal Cu/Mg/Al …

Cu/ZnO/Al2O3 catalyst coatings have been prepared for a micro-channel reactor, which is
more suitable for on-board production of hydrogen concerning steam reforming of methanol …

A simple ionic liquid-assisted approach for the fabrication of graphene-based
nanocomposite is reported. Pd–CuO/rGO and Au–CuO/rGO nanocomposites are …

CuO− ZnO− La2O3/activated carbon (AC) adsorbent was used for phosphine (PH3)
adsorption removal. The effects of O2 content, PH3 concentration, and adsorption …

Hierarchically mesoporous–macroporous titanium dioxide (MMTD) was synthesized by the
hydrolysis of tetrabutyl titanate in the absence of surfactant and autoclaving at 60° C, which …

Walnut-shell activated carbons (WSACs) with high surface area and predominant micropore
development were prepared by KOH chemical activation. The effects of carbonization …

A series of calcium oxide promoted cobalt catalysts were prepared by incipient wetness
impregnation. The influence of the calcium oxide on the dispersion, reducibility and cobalt …