Inconel 740H is a nickel-based alloy for pressure components of ultra-supercritical boilers.
Its chemical composition and strengthened matrix, as well as corrosion resistance, provide …

The chemical composition of standard Inconel 740 superalloy was modified by changes in
the Al/Ti ratio (0.7, 1.5, 3.4) and addition of Ta (2.0, 3.0, 4.0%). Remelted Inconel 740 (A0) …

The work presents the results of investigations into the structure and phase composition of
newly developed high manganese steels of the X98MnAlSiNbTi24-11 and X105MnAlSi24 …

S304H steel is used in the construction of pressure components of boilers with supercritical
operating parameters. The paper presents the results of research on the microstructure …

A coarse-grained microstructure of solution treated AlMg5 aluminium alloy was prepared by
equal channel angular pressing through route BC. Microstructure evolution of the alloy was …

The oxidation behavior of the nickel superalloy Inconel 740H was studied at 750° C for 100,
250, 500, 1000, and 2000 h in a steam atmosphere. Microstructure observations were …

The power industry in Poland is 88% based on solid fuel combustion and from the end of the
last century is continuously being modernised through the construction of new steam boilers …

This paper presents the method for determination of the time of further safe service for
welded joints of boiler components after exceeding the design work time. The evaluation of …

The article presents the results of research on the microstructure and selected mechanical
properties of HR6W nickel-base alloy. The test alloy was subjected to isothermal ageing at …

The ultralight hypoeutectic α-phase Mg–4.5 Li–1.5 Al alloy and hypereutectic β-phase Mg–
12Li–1.5 Al alloy in as-cast state were fabricated and subjected to modification by 0.2 …