Towards full recyclability of end-of-life tires: Challenges and opportunities
End-of-life tires are discarded on a daily basis but even at present limited action has been
taken towards boosting their recyclability as most of the tires are either incinerated or …
taken towards boosting their recyclability as most of the tires are either incinerated or …
Waste refinery: the valorization of waste plastics and end-of-life tires in refinery units. A review
This review collects a wide range of initiatives and results that expose the potential of the
refineries to be converted into waste refineries. Thus, they will use their current units for the …
refineries to be converted into waste refineries. Thus, they will use their current units for the …
Pursuing the end-of-life tire circularity: an outlook toward the production of secondary raw materials from tire pyrolysis oil
Pyrolysis is perceived as the missing link between the management of end-of-life tires
(ELTs) and the tire industry because it strikes directly in the transition from a linear to a …
(ELTs) and the tire industry because it strikes directly in the transition from a linear to a …
Coprocessing of low concentration waste plastics and scrapped tires pyrolysis oil in the FCC Advanced Cracking Evaluation laboratory unit
The research focused on the coprocessing of RFCC standard feedstock (SF) with waste
plastics (WPPO) and scrapped tires (STPO) pyrolysis oil at concentration of 5 and 10 wt …
plastics (WPPO) and scrapped tires (STPO) pyrolysis oil at concentration of 5 and 10 wt …
Revisiting a large-scale FCC riser reactor with a particle-scale model
Y Du, X Chen, S Li, AS Berrouk, W Ren… - Chemical Engineering …, 2022 - Elsevier
Understanding gas–solid hydrodynamics, heat and mass transfer, and multiphase reactions
is of great importance to the design of a large-scale fluid catalytic cracking (FCC) riser …
is of great importance to the design of a large-scale fluid catalytic cracking (FCC) riser …
Product composition and coke deposition in the hydrocracking of polystyrene blended with vacuum gasoil
The upgrading of polystyrene (PS) together with vacuum gasoil (VGO) by means of
hydrocracking has been investigated. The aim of the work has consisted on explaining …
hydrocracking has been investigated. The aim of the work has consisted on explaining …
A Review of Modelling of the FCC Unit–Part I: The Riser
Heavy petroleum industries, including the fluid catalytic cracking (FCC) unit, are useful for
producing fuels but they are among some of the biggest contributors to global greenhouse …
producing fuels but they are among some of the biggest contributors to global greenhouse …
Fuel production via catalytic cracking of pre-hydrotreated heavy-fuel oil generated by marine-transport operations
We examine the conversion of heavy-fuel oil waste generated by marine-transport
operations into drop-in transportation fuels. The proposed conversion process comprises …
operations into drop-in transportation fuels. The proposed conversion process comprises …
Justification of the possibility of car tires recycling as part of coal-water composites
GV Kuznetsov, SV Syrodoy, MV Purin… - Journal of …, 2021 - Elsevier
The results of experimental studies of ignition processes of multi-component fuel droplets
based on coal, water and synthetic oil (synthetic-oil (SO)): water/coal/synthesis-oil (WCF-Oil) …
based on coal, water and synthetic oil (synthetic-oil (SO)): water/coal/synthesis-oil (WCF-Oil) …
[HTML][HTML] Two-stage thermal pyrolysis of plastic solid waste: Set-up and operative conditions investigation for gaseous fuel production
In response to the escalating global challenge of mounting plastic waste and the imperative
to adopt more sustainable practices for resource utilization, our study focuses on the …
to adopt more sustainable practices for resource utilization, our study focuses on the …