Recent advances in ammonia gas sensors based on carbon nanomaterials
AG Bannov, MV Popov, AE Brester, PB Kurmashov - Micromachines, 2021 - mdpi.com
This review paper is devoted to an extended analysis of ammonia gas sensors based on
carbon nanomaterials. It provides a detailed comparison of various types of active materials …
carbon nanomaterials. It provides a detailed comparison of various types of active materials …
Physics and applications of aligned carbon nanotubes
Y Lan, Y Wang, ZF Ren - Advances in Physics, 2011 - Taylor & Francis
Ever since the discovery of carbon nanotubes (CNTs) by Iijima in 1991, there have been
extensive research efforts on their synthesis, physics, electronics, chemistry, and …
extensive research efforts on their synthesis, physics, electronics, chemistry, and …
A micelle fusion–aggregation assembly approach to mesoporous carbon materials with rich active sites for ultrasensitive ammonia sensing
Nanostructured carbon materials have received considerable attention due to their special
physicochemical properties. Herein, ordered mesoporous carbons (OMCs) with two …
physicochemical properties. Herein, ordered mesoporous carbons (OMCs) with two …
Highly sensitive thin film NH3 gas sensor operating at room temperature based on SnO2/MWCNTs composite
A SnO2/MWCNTs composite-based NH3 sensor working at room temperature was
fabricated by thin film microelectronic technique. The gas-sensitive composite thin film was …
fabricated by thin film microelectronic technique. The gas-sensitive composite thin film was …
Enhancement of NH3 Gas Sensitivity at Room Temperature by Carbon Nanotube-Based Sensor Coated with Co Nanoparticles
Multi-walled carbon nanotube (MWCNT) film has been fabricated onto Pt-patterned alumina
substrates using the chemical vapor deposition method for NH3 gas sensing applications …
substrates using the chemical vapor deposition method for NH3 gas sensing applications …
[HTML][HTML] Study of polypyrrole-coated MWCNT nanocomposites for ammonia sensing at room temperature
The nanocomposite of polypyrrole (PPy) and carboxylated multi-walled carbon nanotubes
(MWCNT) was synthesized by in situ chemical oxidative polymerization method using HCl …
(MWCNT) was synthesized by in situ chemical oxidative polymerization method using HCl …
Effects of O2 plasma treatment on NH3 sensing characteristics of multiwall carbon nanotube/polyaniline composite films
KP Yoo, KH Kwon, NK Min, MJ Lee, CJ Lee - Sensors and Actuators B …, 2009 - Elsevier
The effects of radio frequency oxygen plasma treatment on the NH3 gas sensing
characteristics of multiwall carbon nanotube (MWCNT)/polyaniline (PANI) composite films …
characteristics of multiwall carbon nanotube (MWCNT)/polyaniline (PANI) composite films …
Development of carbon nanotube-based gas sensors for NOx gas detection working at low temperature
T Ueda, MMH Bhuiyan, H Norimatsu, S Katsuki… - Physica E: Low …, 2008 - Elsevier
Carbon nanotube (CNT)-based NOx gas sensors which can operate at room temperature
were prepared on Al2O3 substrates with interdigitated Pt-electrodes using both dc sputtering …
were prepared on Al2O3 substrates with interdigitated Pt-electrodes using both dc sputtering …
Thin film polypyrrole/SWCNTs nanocomposites-based NH3 sensor operated at room temperature
A PPY/SWCNTs nanocomposite-based sensor with relatively high sensitivity and fast
response–recovery was developed for detection of NH3 gas at room temperature. The gas …
response–recovery was developed for detection of NH3 gas at room temperature. The gas …
Highly sensitive and selective carbon nanotube-based gas sensor arrays functionalized with different metallic nanoparticles
We present the fabrication and characterization of selective CNT-based gas sensor, which is
capable of discriminating between four test gases (NH 3, ethanol, CO and CO 2). Different …
capable of discriminating between four test gases (NH 3, ethanol, CO and CO 2). Different …