Turnitin 降AI改写 早检测系统 早降重系统 Turnitin-UK版 万方检测-期刊版 维普编辑部版 Grammarly检测 Paperpass检测 checkpass检测 PaperYY检测

A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy

H Bai, L Zhong, L Kang, J Liu, W Zhuang, Z Lv… - Journal of Alloys and …, 2021 - Elsevier
Aiming at the problem of the “inverse relationship” between the hardness (wear resistance)
and toughness of the traditional single homogeneous structure coating on the surface of …
Сачувај Цитирај 184 пута наведен Сродни чланци Све верзије (2)

Effect of SiC and TiC content on microstructure and wear behavior of Ni-based composite coating manufactured by laser cladding on Ti–6Al–4V

Y Zhang, Z Liu, Z Lv, J Cao, Y Tong, M Sun, C Cui… - Wear, 2024 - Elsevier
The low hardness and poor wear resistance of titanium alloys limit their widespread
industrial use. In this study, a composite coating made of Ni60, SiC, and TiC powders using …
Сачувај Цитирај 24 пута наведен Сродни чланци

Characterization and wear behavior of NiCrMoSiC microwave cladding

H Sharanabasava, CD Prasad, MR Ramesh - Journal of Materials …, 2024 - Springer
A microwave hybrid heating technique has been employed to develop NiCr-Mo-SiC
composite cladding on titanium alloy (Grade-5/Ti-6Al-4 V/Titan-31). The developed …
Сачувај Цитирај 62 пута наведен Сродни чланци Све верзије (3)

Enhancing high-temperature fretting wear resistance of TC21 titanium alloys by laser cladding self-lubricating composite coatings

K Hua, H Ding, L Sun, Y Cao, X Li, H Wu… - Journal of Alloys and …, 2024 - Elsevier
Fretting wear is one of the main factors restricting the fastener service reliability for the high-
temperature titanium alloys. Enhancing the high-temperature fretting wear resistance of …
Сачувај Цитирај 27 пута наведен Сродни чланци

Microstructure, wear and corrosion behavior of high-entropy alloy coatings: the concentration of Mo element and the dual effect of σ-CrMo phase

C Cui, M Wu, R He, D Jie, Y Gong, X Miao - Surface and Coatings …, 2023 - Elsevier
Abstract In this work, LaB 6/FeCoNiCrMo X (X= 0, 0.3, 0.6 and 1) high-entropy alloys
coatings with different Mo contents were prepared on the Ti6Al4V substrate by laser …
Сачувај Цитирај 23 пута наведен Сродни чланци

Laser-directed energy deposition of in-situ titanium-matrix coatings with a Ti-B4C cored wire

L Wang, Y Huang, C Jia, L Yang, S Yan - Additive Manufacturing, 2023 - Elsevier
To improve the wear resistance of TC4 alloy, laser-directed energy deposition combined
with in-situ synthesis method was developed to fabricate titanium carbides and titanium (di) …
Сачувај Цитирај 19 пута наведен Сродни чланци

High-temperature wear resistance improvement mechanism of TiAlCrNiSiNbx high-entropy alloy films through sliding wear-induced gradient nanostructure

H Wang, Z Lin, B Qin, J Sun, F Su, Z Liang… - Tribology International, 2024 - Elsevier
TiAlCrNiSiNb x high-entropy alloy films (HEFs) with varying Nb concentrations were
deposited using multi-target magnetron co-sputtering at a controlled sputtering power. At …
Сачувај Цитирај 7 пута наведен Сродни чланци

Microstructure and tribological properties of Ni-based laser-clad coatings by rare earth modification

H Zhuang, Q Zhang, D Zhang - Journal of Thermal Spray Technology, 2021 - Springer
Abstract TiC+ TiB 2+ Ti 2 Ni-reinforced Ni-based laser-clad coatings were prepared on Ti-
6Al-4V by CeO 2 modification. The forming quality, microstructure, element distribution …
Сачувај Цитирај 17 пута наведен Сродни чланци Све верзије (3)

Microstructure and properties of pure titanium coating on Ti-6Al-4V alloy by laser cladding

C Wang, J Li, T Wang, L Chai, C Deng, Y Wang… - Surface and Coatings …, 2021 - Elsevier
A coating of pure titanium without defects was successfully prepared on the surface of Ti-6Al-
4V substrate by pulsed laser cladding. The characteristics and performance of the coating …
Сачувај Цитирај 54 пута наведен Сродни чланци

The tribological properties of two-phase hard and soft composite wear-resistant coatings on titanium alloys

Y Bian, L Cao, D Zeng, J Cui, W Li, Z Yu… - Surface and Coatings …, 2023 - Elsevier
There are still problems associated with the use of conventional modified coatings on
titanium alloys despite their attempts to improve wear resistance. These problems include …
Сачувај Цитирај 22 пута наведен Сродни чланци