Recent advances in friction-stir welding–process, weldment structure and properties
Friction-stir welding is a refreshing approach to the joining of metals. Although originally
intended for aluminium alloys, the reach of FSW has now extended to a variety of materials …
intended for aluminium alloys, the reach of FSW has now extended to a variety of materials …
Friction stir welding of aluminium alloys
PL Threadgill, AJ Leonard, HR Shercliff… - International Materials …, 2009 - Taylor & Francis
The comprehensive body of knowledge that has built up with respect to the friction stir
welding (FSW) of aluminium alloys since the technique was invented in 1991 is reviewed …
welding (FSW) of aluminium alloys since the technique was invented in 1991 is reviewed …
Friction stir welded structural materials: beyond Al-alloys
The friction stir welding (FSW) technique is widely accepted to be one of the most significant
welding techniques to emerge in the last 20 years. Friction stir welding of Al-alloys is now …
welding techniques to emerge in the last 20 years. Friction stir welding of Al-alloys is now …
Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds
In present work friction stir welds produced in 1mm thick plates of AA 6016-T4 aluminium
alloy, with two different tools, were analysed and compared concerning the microstructure …
alloy, with two different tools, were analysed and compared concerning the microstructure …
Investigation of the welding parameter dependent microstructure and mechanical properties of friction stir welded pure copper
YF Sun, H Fujii - Materials Science and Engineering: A, 2010 - Elsevier
The process window for friction stir welding of commercially pure copper was obtained,
which included a welding speed ranged from 200 to 800mm/min, a rotation speed ranged …
which included a welding speed ranged from 200 to 800mm/min, a rotation speed ranged …
Effect of welding speed on microstructure and mechanical properties of friction stir welded copper
JJ Shen, HJ Liu, F Cui - Materials & Design, 2010 - Elsevier
The 3-mm-thick copper plates were friction stir welded at a low tool rotation rate of 600rpm.
The influence of welding speed on microstructure and mechanical properties of the joints …
The influence of welding speed on microstructure and mechanical properties of the joints …
Utilising friction spot joining for dissimilar joint between aluminium alloy (A5052) and polyethylene terephthalate
The weld strength of thermoplastics with aluminium alloy, such as high density polyethylene
and polypropylene sheets, is influenced by friction stir welding parameters. This paper …
and polypropylene sheets, is influenced by friction stir welding parameters. This paper …
Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
Adaptive remeshing finite element model is used for the prediction of material behavior and
temperature histories in friction stir welding (FSW). Then, Monte Carlo method with …
temperature histories in friction stir welding (FSW). Then, Monte Carlo method with …
Machine learning classification-based approach for mechanical properties of friction stir welding of copper
The paper presents a machine learning classification-based model for a friction stir welded
copper's mechanical properties. The models train and test 119 experimental data for the …
copper's mechanical properties. The models train and test 119 experimental data for the …
Influence of tool pin profiles on friction stir welding of copper
The influence of tool pin profiles on microstructure and mechanical properties of friction stir
welded copper was studied. The different tool pin profiles such as taper cylindrical, taper …
welded copper was studied. The different tool pin profiles such as taper cylindrical, taper …