Model for the viscosity and thermal conductivity of refrigerants, including a new correlation for the viscosity of R134a
We present modifications to an extended corresponding states (ECS) model for thermal
conductivity and viscosity originally developed by Ely and Hanley (Ind. Eng. Chem. Fundam …
conductivity and viscosity originally developed by Ely and Hanley (Ind. Eng. Chem. Fundam …
Thermodynamic Properties of Binary Mixtures of p-Xylene with Cyclohexane, Heptane, Octane, and N-Methyl-2-pyrrolidone at Several Temperatures
C Yang, W Xu, P Ma - Journal of Chemical & Engineering Data, 2004 - ACS Publications
Densities and viscosities for p-xylene with cyclohexane, heptane, octane, and N-methyl-2-
pyrrolidone were determined from (298.15 to 353.15) K and at atmospheric pressure. The …
pyrrolidone were determined from (298.15 to 353.15) K and at atmospheric pressure. The …
Density and viscosity measurements of 2, 2, 4-trimethylpentane (isooctane) from 198 K to 348 K and up to 100 MPa
New density and viscosity results for 2, 2, 4-trimethylpentane at temperatures from 198 K to
348 K and pressures up to 100 MPa are reported. The measurements of both properties …
348 K and pressures up to 100 MPa are reported. The measurements of both properties …
Thermo-physical properties of water-based single-walled carbon nanotube nanofluid as advanced coolant
M **ng, J Yu, R Wang - Applied Thermal Engineering, 2015 - Elsevier
In this paper, the thermo-physical properties of water-based single-walled carbon nanotube
nanofluids (SWCNTs-nanofluids) are experimentally studied. The effect of mass …
nanofluids (SWCNTs-nanofluids) are experimentally studied. The effect of mass …
Equation of state modeling of high-pressure, high-temperature hydrocarbon density data
Experimental densities are reported for n-pentane, n-octane, cyclooctane, 2, 2, 4-
trimethylpentane, n-decane, and toluene to∼ 280MPa and∼ 250° C. These densities are in …
trimethylpentane, n-decane, and toluene to∼ 280MPa and∼ 250° C. These densities are in …
Viscosity and density of mixtures of methane and n-decane from 298 to 393 K and up to 75 MPa
Experimental results of viscosity and density of mixtures of methane and n-decane are
reported at temperatures from 303 to 393K and pressures up to 75MPa, at five compositions …
reported at temperatures from 303 to 393K and pressures up to 75MPa, at five compositions …
Simultaneous viscosity and density measurement of supercritical CO2-saturated PEG 400
In order to analyse the effect of supercritical fluid (SCF) addition on polymer viscosity we
have used, for the first time, a high precision vibrating wire instrument, for the simultaneous …
have used, for the first time, a high precision vibrating wire instrument, for the simultaneous …
Advances in Falling-Cylinder Viscometry: A Comprehensive Review
This paper focuses on falling-cylinder viscometry, a commonly used method for measuring
viscosity due to its simplicity and versatility. The review explores the development of falling …
viscosity due to its simplicity and versatility. The review explores the development of falling …
Experimental Study of the Density and Viscosity of-Heptane at Temperatures from 298 K to 470 K and Pressure upto 245 MPa
DI Sagdeev, MG Fomina, GK Mukhamedzyanov… - International Journal of …, 2013 - Springer
The density and viscosity of n-heptane have been simultaneously measured over the
temperature range from 298 K to 470 K and at pressures up to 245 MPa using the …
temperature range from 298 K to 470 K and at pressures up to 245 MPa using the …
Density and Viscosity Measurements of n-Dodecane and Carbon Dioxide + n-Dodecane at Temperatures from (298 to 548) K
A vibrating-wire apparatus was used to measure liquid density and viscosity simultaneously
under high-temperature conditions. Densities and viscosities were measured along 11 …
under high-temperature conditions. Densities and viscosities were measured along 11 …