In this work, hot compression deformation behavior and processing maps of ATI 718Plus
superalloy were studied by isothermal compression test on Gleeble-3800 thermal simulation …

The spheroidization behavior of γ′ phase and dynamic recrystallization (DRX) mechanisms
of a novel HIPed powder metallurgy (P/M) superalloy deformed at high temperatures (1080 …

The hot deformation behavior of a new Ni–Co based alloy was investigated by the
isothermal compression tests in a temperature range of 1060–1180° C and a strain rate …

Abstract 718Plus superalloy was investigated to obtain a detailed and fundamental
understanding of the microstructure evolution and the underlying mechanisms. Isothermal …

In this investigation, the isothermal tensile experiments over wide ranges of deformation
parameters (strain rate and tensile temperature) are conducted for studying the high …

Nickel-based superalloys were thermomechanically processed at temperatures of 1050–
1170° C and strain rates of 0.001–10 s− 1 to study the hot-deformation behavior and …

Taking the importance of γ′ phase into consideration, an as-cast nickel-based superalloy
was investigated by uniaxial compression experiments performed at sub-solvus and super …

The hot deformation behavior of AA5083 aluminum alloy was studied using isothermal
compression tests with a Gleeble–3500 thermal simulator at strain rate of 0.01–10 s− 1 and …

The high-temperature deformation process of molybdenum alloy reinforced by 2.0% ZrO 2
was tested in the temperature range of 1100–1400° C and strain rate range of 0.005–1 s− 1 …

In this work, a new type of Al–Mg–Mn-Sc-Zr alloy was compressed under different
temperatures (300° C–450° C) and different strain rates (0.0001 S-1 to 10 S− 1). The …