The ever‐growing market of electric vehicles and the upcoming grid‐scale storage systems
have stimulated the fast growth of renewable energy storage technologies. Aluminum …

Aluminum has long attracted attention as a potential battery anode because of its high
theoretical voltage and specific energy. The protective oxide layer on the aluminum surface …

Electrodeposition of aluminum was carried out by DC constant current and pulse current
methods in the molten salt system AlCl 3-BPC at 30° C. The aluminum was unable to …

The electrodeposition of binary aluminum-manganese alloys from chloroaluminate molten
salts is reported. The manganese content of the electrodeposit varies from 7 to 30 w/o and is …

Conclusion Etching phenomenon instead of electroless deposition was discovered due to a
passive material, Cu~ O, formed on the copper surface within a particular pH range. The …

The Al–Mn alloy coatings were electrodeposited on AZ31B Mg alloy in AlCl3–NaCl–KCl–
MnCl2 molten salts at 170° C aiming to improve the corrosion resistance. However, in order …

The effect of additions of surface-active substances on the aluminium plating of iron (steel) in
molten chloride electrolytes containing AlCl 3 as the electrochemically active component …

The electrochemical behavior of niobium in a 52: 48 mole ratio AlCl3: NaCl molten salt
electrolyte was examined by linear sweep voltammetry, chronoamperometry and …

The microstructure of electrodeposited titanium-aluminide alloys containing 3.6 to 24.1 at.
pct Ti was studied by transmission electron microscopy. The surface morphology of the …

Electrochemical deposition of aluminum from NaA1C14 melts saturated with NaC1 onto a
glassy carbon electrode at 175~ has been studied by voltammetry, chronoamperometry, and …