The importance of the low-temperature selective catalytic reduction (LT-SCR) of NOx by
NH3 is increasing due to the recent severe pollution regulations being imposed around the …

Vanadium-based catalysts have been used for several decades in ammonia-based
selective catalytic reduction (NH3-SCR) processes for reducing NO x emissions from various …

Sulfur poisoning is a common problem causing catalyst deactivation during the industrial
catalytic process. However, for selective catalytic reduction of NO x with ammonia (NH3 …

The structure of dispersed vanadyl species plays a crucial role in the selective catalytic
reduction (SCR) of NO with NH3 over vanadia-based catalysts. Here, we demonstrate that …

A high-performance denitration catalyst based on Mn-Ce mixed-oxide derived from a
specific Mn/Ce precursorwas fabricated by solvothermal method. It exhibited outstanding …

Abstract SO 2 poisoning of NH 3-SCR catalysts at low temperature (< 300° C) is still an
austere challenge. In this work, γ-Fe 2 O 3 was taken as a model catalyst and the effect of …

A superior Ce-W-Ti mixed oxide catalyst prepared by a facile homogeneous precipitation
method showed excellent NH3-SCR activity and 100% N2 selectivity with broad operation …

Manganese-based catalysts have shown excellent low-temperature selective catalytic
reduction (SCR) activity for NO x removal. However, they all suffer from the serious SO 2 …

(Fe3− xMnx) 1− δO4 was synthesized using a co-precipitation method and then developed
as a catalyst for the low temperature selective catalytic reduction (SCR) of NO with NH3. The …

Abstract Fe and Co doped Mn-Ce/TiO 2 catalysts for low temperature NH 3-SCR with SO 2
resistance were investigated via in-situ DRIFTS, SO 2-TPD and FTIR. The activity results …