Recent progress in the kinetics of grain coarsening and abnormal grain growth (AGG) is
presented in this overview article. The factors affecting the kinetics of grain growth is …

Processing the electroceramics by cold sintering is an effective and emerging technique in
recent research investigations. Among several existing approaches, this method has energy …

Laser directed energy deposition method has been widely employed in manufacturing
nickel based superalloy components of gas turbines and aero engines. However, the laser …

In this study, the continuous dynamic recrystallization (CDRX) behaviors of a hot-deformed
Ti-55511 alloy are investigated in β single-phase domain. CDRX is found to play a dominant …

The microstructure evolution of a Ti-55511 alloy deformed at high temperatures (from 1163
K to 1253 K) and wide strain rate range (from 10 s− 1 to 0.001 s− 1) is studied by isothermal …

The uniform refinement mechanisms and methods of deformed mixed and coarse grains
inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have …

In authors' previous work [Mater. Charact., 141 (2018) 212–222], it was found that the
heterogeneous deformed microstructures can be replaced by the relatively homogeneous …

Mechanical shot peening and other plastic deformation surface-strengthening processes are
of great benefit to the improvement of the surface mechanical properties of structural …

Counter-gravity casting (CGC) is a widely adopted material processing technique in metals
due to its notable benefits, including enhanced filling behavior, reduced defect occurrence …

To enhance the wear-resistance of nickel-based blade surfaces, a (CoCrNi) 88 Al 6 Ti 6-cBN
composite coating was produced on GH4169 substrates using HSLC. The microstructure …