With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical
limit, pushing conversion efficiencies even higher now relies on reducing every type of …

We present n‐type bifacial solar cells with a rear interfacial SiOx/n+: poly‐Si passivating
contact ('monoPoly'cells) where the interfacial oxide and n+: poly‐Si layers are fabricated …

A big challenge to improve the conversion efficiency of n-type solar cell is the recombination
and electrical contacting of boron (B)-doped emitters in n-TOPCon solar cells. This work …

Screen-printed contacts to doped polysilicon (poly-Si) layers with high-temperature fire-
through pastes is one of the key enablers for widespread industrial acceptance of …

Reliable characterization techniques to accurately quantify the metallization-induced
recombination losses as well as contact resistivity losses of screen-printed cells are crucial …

TOPCon (tunnel oxide passivated contact) solar cell is the mainstream high‐efficiency
crystalline silicon solar cell structure. However, the lack of efficient passivation contact …

TOPCon solar cell with boron (B)‐doped emitters plays an important role in photovoltaic cell
technology. However, a major challenge to further improving the metallization‐induced …

As new technologies for high-performance PV modules are developed and applied, the cost
of the PV modules is also increasing. To reduce the consumption of Ag paste used for the …

A predictive simulation framework, combining process and device simulation, is developed
in order to assist in BBr 3 boron tube furnace diffusion process optimization for n-type silicon …

Herein, a novel metallization technique is reported for crystalline silicon heterojunction
(SHJ) solar cells in which silver (Ag) fingers are printed on the SHJ substrates by dispensing …