[HTML][HTML] Effect of ECAP temperature on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy
The effect of equal channel angular pressing (ECAP) at different temperatures (room
temperature, 120, 150 and 180° C) on microstructure and mechanical properties of Al-7075 …
temperature, 120, 150 and 180° C) on microstructure and mechanical properties of Al-7075 …
Improved bake-hardening response of Al-Zn-Mg-Cu alloy through pre-aging treatment
YS Lee, DH Koh, HW Kim, YS Ahn - Scripta materialia, 2018 - Elsevier
The effect of pre-aging treatment on the bake-hardening response of an Al-Zn-Mg-Cu alloy
was investigated. It was determined that pre-aging immediately after quenching is an …
was investigated. It was determined that pre-aging immediately after quenching is an …
Preparation, characterization and optimization of nanocellulose whiskers by simultaneously ultrasonic wave and microwave assisted
Z Lu, L Fan, H Zheng, Q Lu, Y Liao, B Huang - Bioresource technology, 2013 - Elsevier
Simultaneously ultrasonic wave and microwave assisted technique (SUMAT), as a method
of process intensification, was first applied to the preparation of nanocellulose whiskers …
of process intensification, was first applied to the preparation of nanocellulose whiskers …
Preparation and characterization of cellulose nanocrystals via ultrasonication-assisted FeCl3-catalyzed hydrolysis
Q Lu, L Tang, F Lin, S Wang, Y Chen, X Chen, B Huang - Cellulose, 2014 - Springer
Cellulose nanocrystals (CNC) was obtained from bamboo pulp via ultrasonication-assisted
FeCl 3-catalyzed hydrolysis process, with parameters optimized by response surface …
FeCl 3-catalyzed hydrolysis process, with parameters optimized by response surface …
A survey of the effect of cryogenic treatment and natural ageing on structural changes and second-phase precipitation in Al–Zn–Mg–Cu alloy
In this work, the impacts of shallow cryogenic (− 40° C) and natural ageing treatments on the
precipitation of the second phases in a 7xxx alloy were investigated. Using the differential …
precipitation of the second phases in a 7xxx alloy were investigated. Using the differential …
Novel strategy of electroshock treatment for improving mechanical performances of Al–Zn–Mg–Cu alloy by edge dislocation increment
W Wu, Y Song, J Lu, Y Yu, L Hua - Materials Science and Engineering: A, 2022 - Elsevier
The application of high-strength Al–Zn–Mg–Cu alloy is seriously limited because of its poor
ductility and fatigue property. In this work, an electroshock treatment (EST), which is an …
ductility and fatigue property. In this work, an electroshock treatment (EST), which is an …
Comparative analysis of response surface methodology and artificial neural network on the wear properties of surface composite fabricated by friction stir processing
Aluminium surface composite having ceramic reinforcement is successfully developed using
friction stir processing at different tool rpm. Pin-on-disc test was performed at different sliding …
friction stir processing at different tool rpm. Pin-on-disc test was performed at different sliding …
Experiment and numerical investigation on beetle elytra inspired lattice structure: Enhanced mechanical properties and customizable responses
The elytra of the ironclad beetles possess very strong and toughness performance, to protect
the body from catastrophic physical damage, owing to its unique curved geometry and …
the body from catastrophic physical damage, owing to its unique curved geometry and …
Microstructural evolution and mechanical properties during the friction stir welding of 7075-O aluminum alloy
K Dehghani, R Ghorbani, AR Soltanipoor - The International Journal of …, 2015 - Springer
In the present work, the AA7075-O was subjected to friction stir welding. The rotating and
welding speeds were 630 rpm and 32 mm/min, respectively. The diameters of shoulder and …
welding speeds were 630 rpm and 32 mm/min, respectively. The diameters of shoulder and …
Parameters Optimization for End Milling of Al7075–ZrO2–C Metal Matrix Composites Using GRA and ANOVA
M Bhuvanesh Kumar, P Sathiya… - Transactions of the Indian …, 2020 - Springer
The present study examines the machinability characteristics of end milling process on the
Jobber XL CNC machining center to produce minimum surface roughness, minimum cutting …
Jobber XL CNC machining center to produce minimum surface roughness, minimum cutting …