Advanced modification of Scandia‐stabilized zirconia electrolytes for solid oxide fuel cells application—a review
Solid oxide fuel cells (SOFCs) are recognized as an energy generation device with high
power density and energy conversion efficiency, low noise, low greenhouse gas emissions …
power density and energy conversion efficiency, low noise, low greenhouse gas emissions …
Structure and electrical conductivity of BaCe0. 85Ln0. 15O3− δ (Ln= Gd, Y, Yb) ceramics
BaCe0. 85Ln0. 15O3− δ (Ln= Gd, Y, Yb) ceramics are synthesized by the solid state reaction
method. All of BaCe0. 85Ln0. 15O3− δ ceramics are composed of a single perovskite-type …
method. All of BaCe0. 85Ln0. 15O3− δ ceramics are composed of a single perovskite-type …
Mechanical and electrical characterization of 8YSZ-ScCeSZ ceramics
The effects of small amounts (up to 5 wt.%) of scandia-and ceria-stabilized zirconia on the
electrical conductivity, and the elastic modulus and hardness of yttria-stabilized zirconia …
electrical conductivity, and the elastic modulus and hardness of yttria-stabilized zirconia …
[HTML][HTML] Two-step sintering of partially stabilized zirconia for applications in ceramic crowns
Partially-stabilized zirconia is used in ceramic crowns due to its excellent mechanical
properties and bio-inertness but does not match the natural color and translucency of tooth …
properties and bio-inertness but does not match the natural color and translucency of tooth …
Microwave sintering of ceria-doped scandia stabilized zirconia as electrolyte for solid oxide fuel cell
In this work, the effect of microwave sintering on the properties of 1 mol% ceria-doped
scandia stabilized zirconia (10Sc1CeSZ) was investigated. The sintering was carried out at …
scandia stabilized zirconia (10Sc1CeSZ) was investigated. The sintering was carried out at …
Evaluation of Sc2O3–CeO2–ZrO2 electrolyte-based tubular fuel cells using activated charcoal and hydrogen fuels
Solid oxide fuel cells (SOFCs), as energy conversion devices, can use a variety of gaseous
(hydrogen, methane, ammonia, carbon monoxide) and solid carbon fuels derived from coal …
(hydrogen, methane, ammonia, carbon monoxide) and solid carbon fuels derived from coal …
Phase stability and ionic conductivity of cubic xNb2O5-(11-x) Sc2O3-ZrO2 (0≤ x≤ 4)
The present work looks at the effect of Nb 2 O 5 co-do** on the structure and conductivity
of 11 mol.% Sc 2 O 3 stabilized ZrO 2 solid electrolyte for intermediate temperature solid …
of 11 mol.% Sc 2 O 3 stabilized ZrO 2 solid electrolyte for intermediate temperature solid …
Effects of sintering on the mechanical and ionic properties of ceria-doped scandia stabilized zirconia ceramic
The effect of conventional sintering from 1300 to 1550° C on the properties of 1 mol% ceria-
doped scandia stabilized zirconia was investigated. In addition, the influence of rapid …
doped scandia stabilized zirconia was investigated. In addition, the influence of rapid …
Effective improvement of interface modified strontium titanate based solid oxide fuel cell anodes by infiltration with nano-sized palladium and gadolinium-doped …
The development of low temperature solid oxide fuel cell (SOFC) anodes by infiltration of
Pd/Gd-doped cerium oxide (CGO) electrocatalysts in Nb-doped SrTiO 3 (STN) backbones …
Pd/Gd-doped cerium oxide (CGO) electrocatalysts in Nb-doped SrTiO 3 (STN) backbones …
Effect of calcined parameters on microstructure and electrical conductivity of 10Sc1CeSZ
J Tan, Y Su, H Tang, T Hu, Q Yu, R Tursun… - Journal of Alloys and …, 2016 - Elsevier
Abstract 10Sc1CeSZ (10 mol% Sc 2 O 3–1 mol% CeO 2–89 mol% ZrO 2) nanopowders
were prepared by hydrothermal and calcinations. The calcined powders were uniaxially …
were prepared by hydrothermal and calcinations. The calcined powders were uniaxially …