Counter-gravity casting (CGC) is a widely adopted material processing technique in metals
due to its notable benefits, including enhanced filling behavior, reduced defect occurrence …

Low-pressure casting and high-pressure casting processes are the most common liquid-
based technologies used to produce aluminum components. Processing conditions such as …

Aluminium and its alloys have been widely used in the automotive industry for some time
and A356 is one of the most popular aluminium alloys today in the sector. It contains …

Mechanical properties of the castings are directly affected negatively by the inclusions, such
as its own oxide occurring during melting, if proper and logical liquid metal processes could …

AlSi7Mg investment cast test bars were produced using low-pressure die casting and
ultrasonically refined during cooling. The microstructure and mechanical properties of the …

This research paper is a proof-of-concept based on the application of a fully integrated CAE
tools to improve the quality of castings produced by the hybrid LPSC process, for which …

Gas pores on the top face of engine crankcases which are produced by Low Pressure Die
Casting (LPDC) have been studied. Micrographic analysis has been conducted to …

A356 is a common industrial alloy due to its relatively good mechanical properties, reduced
weight and capability be casted into complex structures. However, in order to display good …

An attempt has been made to simulate the mold filling behavior of semi-solid slurry of Al–
10.5 Si–1.7 Cu alloy for rheo-pressure die casting (RPDC) with additional emphasis on the …

Ultrasonic vibration is a physical processing technique that has been gathering support as
an environmentally friendly approach to degas light alloy melts. Since metallic sonotrodes …