Objectives The objective was to discuss the research on zirconia published in the past 15
years to help the dental materials community understand the key properties of the types of …

The aim of this article is to comprehensively review the revolution of dental zirconia (Zir),
including its types, properties, applications, and cementation procedures. A comprehensive …

Objective The aim of this study was to provide a design guideline for develo** tetragonal
yttria-stabilized zirconia with improved translucency. Methods The translucency, the in-line …

The mechanical properties of single‐phase (Hf, Zr, Ti, Ta, Nb) C high‐entropy carbide (HEC)
ceramics were investigated. Ceramics with relative density> 99% and an average grain size …

To enhance the strength-to-weight ratio of a material, one may try to either improve the
strength or lower the density, or both. The lightest solid materials have a density in the range …

The crack-tip fracture process zone (FPZ) length with distributed cohesive stresses is
commonly modelled for quasi-brittle fracture of heterogeneous solids. This study highlights …

A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of
Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic …

This paper reviews the brittle failure of polycrystalline ice at temperatures (> 0.8 Tmp) and
strain rates (∼ 10− 7–10− 1 s− 1) of engineering interest. The discussion addresses ice as a …

Advanced bioceramics have played integral roles in treatment modalities for damaged or
diseased human joints and osseous defects. This paper reviews the uses and properties of …

A new processing strategy based on atmospheric pressure sintering is presented for
obtaining dense SiC‐based materials with microstructures consisting of (i) uniformly …