Stainless steels (SSs) display striking characteristics which can nominate them as
prospective candidates for an endless list of applications. These properties can be further …

In this study, AISI 316L stainless steel was passivated under galvanostatic conditions in citric
acid solutions in the absence and presence of hydrogen peroxide (H2O2). The electronic …

In the present investigation, Al-5Zn-2.5 Mg-1.6 Cu-xSn (x= 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0
wt%) alloys were fabricated using melting and casting technique. The microstructures of the …

Pulsed current electrodeposition was used to deposit a novel AlFeCrNiTi high entropy alloy
coating on copper. As a first step, cyclic voltammetry was used to determine the minimum …

Zr-based conversion coatings have received a lot of attention in recent years because of
their green benefits, which offer nontoxic properties in comparison to conventional chromate …

In this study, a novel hybrid sol–gel coating on AA3003 substrate was developed and the
effects of various waste material additives on the reinforcement of the sol–gel coating and …

This study proposes a method for protecting 6061 aluminum alloy from corrosion fatigue.
Corrosion fatigue can reduce fatigue strength at the endurance limit (108 cycles) from 55 pct …

This article presents the synthesis of a novel hybrid sol-gel coating and its functionalization
with various waste material additives. The unmodified and modified hybrid coatings were …

Temperature is one of the most important parameters in anodizing treatments of aluminum
alloys as it directly affects the quality of the anodic coatings. This research study has …

This study investigates the influence of the 2024 aluminum alloy was treated with solution
before ceramic treatment on the microstructure and characteristics of ceramic coatings …